High Electromagnetic Interference Shielding Effectiveness of Carbon Nanotube–Cellulose Composite Films with Layered Structures

Composite Materials for Electromagnetic Interference Shielding

This paper demonstrates that the addition of chemical agents and carbon fibers to cement can greatly enhance the shielding effectiveness of the concrete. In addition to improving the shielding effectiveness, carbon fibers and chemical agents enhance the tensile and flexural strengths significant ly. As both carbon fibers and steel fibers are electrically conductive, both can be added to cement ...

Improved Electromagnetic Interference Shielding Properties of MWCNT–PMMA Composites Using Layered Structures

Electromagnetic interference (EMI) shielding effectiveness (SE) of multi-walled carbon nanotubes-polymethyl methacrylate (MWCNT-PMMA) composites prepared by two different techniques was measured. EMI SE up to 40 dB in the frequency range 8.2-12.4 GHz (X-band) was achieved by stacking seven layers of 0.3-mm thick MWCNT-PMMA composite films compared with 30 dB achieved by stacking two layers of 1...

Electromagnetic Shielding Property of Cfrp Composite Laminates

Estimation of Reflectivity and Shielding Effectiveness of Three Layered Laminate Electromagnetic Shield at X-band

Electromagnetic shields are designed to optimize the performance for shielding effectiveness and reflectivity. Multilayered laminates of different materials are developed to achieve excellent results in terms of not only in shielding effectiveness but also for reflectivity. In this paper, a three layered laminate is considered for estimation of the required parameters in the X-band frequency ra...

Electromagnetic Shielding Effectiveness Evaluation For Materials

The theory of electromagnetic shielding is based on the waves equations describing the behavior of electromagnetic field in material. The proposed approach consist in a PSpice model using transmission line model to simulate the attenuation introduced by a material characterized by the macroscopic parameters ε, μ, σ. To verify the data obtained through PSpice simulation, a wave-guide-based measu...