High Electrochemical Performance Silicon Thin-Film Free-Standing Electrodes Based on Buckypaper for Flexible Lithium-Ion Batteries
نویسندگان
چکیده
منابع مشابه
SnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملAn Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes
Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...
متن کاملSilicon Thin Films as Anodes for High-Performance Lithium-Ion Batteries with Effective Stress Relaxation
There is a great deal of interest in developing next-generation lithium ion (Li-ion) batteries with higher energy capacity and longer cycle life for a diverse range of applications such as portable electronic devices, satellites, and next-generation electric vehicles. Silicon (Si) is an attractive anode material that is being closely scrutinized for use in Li-ion batteries because of its highes...
متن کاملHigh electrochemical performance based on the TiO2 nanobelt@few-layered MoS2 structure for lithium-ion batteries.
We report a facile approach to prepare MoS2 nanosheet coated TiO2 nanobelts. The TiO2@MoS2 structure exhibits a reversible capacity of 710 mA h g(-1) at 100 mA g(-1) after 100 cycles with highly stable capacity retention, and bears good rate capability with a reversible capacity of 417 mA h g(-1) at 1000 mA g(-1).
متن کاملSolvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Lithium ion battery electrodes were manufactured using a new, completely dry powder painting process. The solvents used for conventional slurry-cast electrodes have been completely removed. Thermal activation time has been greatly reduced due to the time and resource demanding solvent evaporation process needed with slurry-cast electrode manufacturing being replaced by a hot rolling process. It...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2021
ISSN: 1996-1944
DOI: 10.3390/ma14082053