High efficiency step-up converter using single switch with coupled inductors

نویسندگان

چکیده

Due to high demand for voltage boosting in the field of renewable energy sources, a novel topology step-up converter with single switch is proposed this paper. The uses coupled inductors architecture. enables control stepping-up gain by adjusting duty cycle and selecting appropriate turn ratio inductors. two circuit can act as transformer. Moreover, technique aims harness turning off stresses across switching element suppress stress transferring it load. induced was reduced forwarding power charge capacitor then transfer through diode output. Circuit configuration, principles operation function are demonstrated. verified comparing practical results theoretical.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Efficiency Step-Up Converter with a Low Switch Stress

A novel approach is proposed for a high step-up and high efficiency converters with a low switch stress. The integrated boost-flyback converter uses coupled-inductor techniques to achieve high step-up voltage with low duty ratio, and thus the slope compensation circuit is disregarded. The proposed circuit topology improving highgain ratio, increasing efficiency, reducing the secondary side of c...

متن کامل

Step-up Dc-dc-converter with Coupled Inductors for Low Input Voltages

Step-up dc-dc converters have to cope with extremely low input voltages when used in combination with energy harvesting sources like thermogenerators, inductive generators or solar cells. The presented dc-dc converter is characterized by a high efficiency, up to 70 % in the input voltage range between 200 mV and 500 mV, and a minimum start-up voltage of 70 mV. It can deliver an output power of ...

متن کامل

A Cascaded High Step-up DC-DC Converter with Single Switch for Microsource Applications

Abstract— This paper proposes a new high step-up DC-DC converter designed especially for regulating the DC interface between various microsources and a DC-AC inverter to electricity grid. The figuration of proposed converter is a quadratic boost converter with the coupled inductor in the second boost converter. The converter achieves high step-up voltage gain with appropriate duty ratio and low...

متن کامل

An Integrated Step-Down Converter Using Single-Stage Single- Switch

This paper presents a high step-down tranformerless single-stage single-switch ac/dc converter suitable for universal line applications (90–270 Vr m s ). The topology integrates a buck-type power-factor correction (PFC) cell with a buck–boost dc/dc cell and part of the input power is coupled to the output directly after the first power processing. With this direct power transfer feature and sha...

متن کامل

Proposal of a New High Step-Up Hybrid Switch Converter with Reduced Switch Voltage Stress

In this paper a new step-up DC-to-DC converter with high voltage conversion ratio with small voltage stress is presented. The converter is suitable for the applications where high voltage conversion ratio is required. The proposed converter is different from the conventional Cuk converter and for a given duty ratio provides high conversion ratio with reduced switch voltage stress. Due to low sw...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Indonesian Journal of Electrical Engineering and Computer Science

سال: 2022

ISSN: ['2502-4752', '2502-4760']

DOI: https://doi.org/10.11591/ijeecs.v25.i2.pp690-696