High deviated and horizontal well cementing: Displacement mechanics and cement slurry design.
نویسندگان
چکیده
منابع مشابه
Considerations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE)
As worldwide demand of hydrocarbon is growing fast, the oil and gas companies have been forced to explore reservoirs with more hostile conditions, such as high-pressure, high-temperature conditions. Improved technology, material selection and testing procedures are required to overcome the common problems in these conditions. One of the main phases of well construction is cementing job. Appropr...
متن کاملThe Use of Nanoaccelerator in Cement Slurries in Low Temperature Well Conditions
It has long been known that temperature during circulation and after cement placement is one of the most important parameters for slurry design and the success in cement production. Conventional cements and low density cement slurries usually take a long time to set and cannot provide significant compressive strength. Therefore, it is important to design appropriate low density cement slurries ...
متن کاملUsing an Elastic, Expandable Sealant System for Zonal Isolation of Maroon Wells: a Laboratory Study
An oil and gas well cementing in Gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in Maroon field. The main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. Unlike conventional cem...
متن کاملMixing in the downward displacement of a turbulent wash by a laminar spacer or cement slurry
When drilling an oil well, the well is lined by sinking a steel casing, or liner, into the drilling mud (see Figure 1). The inside of the liner forms a central pipe, and leaves an annular gap between the outside of the liner and the surrounding rock. The inside and outside of the liner are initially filled with drilling mud, which is displaced by pumping a sequence of fluids down inside the lin...
متن کاملApplication of Particle Size Distribution Engineering and Nano-technology to Cement Recipes for some Iranian Offshore Oilfields
The design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc API fluid loss value, appropriate rheology and yield point for effective displacement, adequate compressive strength, which is critical for lightweight slurries, and finally stable cement column behind casing. The main objective ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japanese Association for Petroleum Technology
سال: 1994
ISSN: 1881-4131,0370-9868
DOI: 10.3720/japt.59.374