High Cycle Fatigue Properties of SUS 304 Stainless Steel under Load-Increasing Conditions.

Compressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers

Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...

Magnetic Properties of Metastable 304 Stainless Steel with Bcc Structure

Ordinary 304 stainless steel has a fcc structure and is non-magnetic at room temperature. By using a vapor quenching method, we have fabricated single-phase metastable bcc 304 stainless steel which is strongly ferromagnetic with a magnetization of 130 emu/g and a Curie temperature in excess of 550 OC. Upon subsequent annealing above 550 OC, the metastable bcc state transforms back into the usua...

Corrosion Performance and Tribological Properties of Carbonitrided 304 Stainless Steel

Effect of Weld Metal Microstructure on the Fatigue and Corrosion-Fatigue Properties of GTA-Welded 304 Stainless Steel

In this research, two different filler metals, ERNiCrMo-3 and ER309L, were used for developing different microstructure, austenite (γ) and austenite and ferrite (γ+δ) in the weld metal and fatigue properties of welded samples were evaluated in the air and sea water environments. Microstructural studies indicated a good agreement between predicted microstructures via schiffler diagram and metall...

Effect of Weld Metal Microstructure on the Fatigue and Corrosion-Fatigue Properties of GTA-Welded 304 Stainless Steel

In this research, two different filler metals, ERNiCrMo-3 and ER309L, were used for developing different microstructure, austenite (γ) and austenite and ferrite (γ+δ) in the weld metal and fatigue properties of welded samples were evaluated in the air and sea water environments. Microstructural studies indicated a good agreement between predicted microstructures via schiffler diagram and metall...