منابع مشابه
High Intensity Heavy Ion Injector T-5010
The newly developed 10 mA, 50 keV heavy ion injector T-5010 is intended for use in isotope separators, ion implanters as well as autonomously for researches in the physics and technology of ion sources. It is complete with power supply, control, vacuum and cooling system. The injector layout is shown in Figure 1. The Freeman type ion source with four-electrode accel/decel system is set on the v...
متن کاملThe High Current Transport Experiment for Heavy Ion Inertial Fusion
The High Current Experiment (HCX) at Lawrence Berkeley National Laboratory is part of the US program to explore heavy-ion beam transport at a scale representative of the low-energy end of an induction linac driver for fusion energy production. The primary mission of this experiment is to investigate aperture fill factors acceptable for the transport of space-charge-dominated heavy-ion beams at ...
متن کاملManipulation of High-Current Pulses for Heavy-Ion Fusion
For efficient induction-driven heavy-ion fusion, the current profile along a pulse must be modified in a non-selfsimilar manner between the accelerator and the target. In the accelerator, the pulse should have a duration of at leaat !io ns in order to make efficient use of the induction cores, and the current should by nearly uniform along the pulse to minimize the aperture. In contrsst, the op...
متن کاملBeam Dynamics Studies for a High Current Ion Injector *
Recent ion source developments resulted in the generation of high brilliance, high current beams of protons and light ions. After extraction and transport the beams with large internal space charge forces have to be captured, bunched and preaccelerated for the injection into the following driver part of a new generation of high intensity beam facilities for neutron sources, energy production, t...
متن کاملDesign and Testing of the 2 Mv Heavy Ion Injector for the Fusion Energy Research Program
The Fusion Energy Research Group at the Lawrence Berkeley Laboratory has constructed and tested a pulsed 2 MV injector that produces a driver size beam of potassium ions. This paper will describe the engineering aspects of this development which were generated in a closely coupled effort with the physics staff. The details of the ion source and beam transport physics are covered in another pape...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Il Nuovo Cimento A
سال: 1993
ISSN: 0369-3546,1826-9869
DOI: 10.1007/bf02821249