High Capacity Na–O2 Batteries: Key Parameters for Solution-Mediated Discharge
نویسندگان
چکیده
منابع مشابه
Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملLarge Plastic Deformation in High-Capacity Lithium-Ion Batteries Caused by Charge and Discharge
Evidence has accumulated recently that a high-capacity electrode of a lithium-ion battery may not recover its initial shape after a cycle of charge and discharge. Such a plastic behavior is studied here by formulating a theory that couples large amounts of lithiation and deformation. The homogeneous lithiation and deformation in a small element of an electrode under stresses is analyzed within ...
متن کاملCapacity fade study of lithium-ion batteries cycled at high discharge rates
Capacity fade of Sony US 18650 Li-ion batteries cycled using different discharge rates was studied at ambient temperature. The capacity losses were estimated after 300 cycles at 2C and 3C discharge rates and were found to be 13.2 and 16.9% of the initial capacity, respectively. At 1C discharge rate the capacity lost was only 9.5%. The cell cycled at high discharge rate (3C) showed the largest i...
متن کاملHigh-Capacity, Microporous Cu6Sn5–Sn Anodes for Li-Ion Batteries
Three-dimensional, microporous Cu6Sn5–Sn architectures were created by electrodeposition of copper and tin onto sintered copper foam substrates and evaluated as anodes for lithium-ion batteries. The electrodes were characterized before and after cycling by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectrometry. Before cycling, the electrochemically deposited f...
متن کاملDesign Parameters for Fuel Batteries
Some design parameters of a hydrazine-oxygen fuel battery operating in a zero G field are described in a digital computer programming treatment. The power balance for a battery employing a gas-producing electrode and an electrolyte pump is treated; optimum power densities and flow rates are established. INTRODUCTION WITHIN the last decade fuel cell technology has advanced from the research stag...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Physical Chemistry C
سال: 2016
ISSN: 1932-7447,1932-7455
DOI: 10.1021/acs.jpcc.6b07659