Heterogeneous Strain Distribution Based Programmable Gated Microchannel for Ultrasensitive and Stable Strain Sensing (Adv. Mater. 2/2023)

نویسندگان

چکیده

Strain Sensing In article number 2207141, Yongsong Luo, Xiaoliang Chen, Jinyou Shao, and co-workers propose a gated microchannel-based strain-sensing strategy inspired by ion channels in living organisms. Discretely distributed micropillars are introduced into fluidic to act as smart gates, which can nearly cut off the pathways during contraction closure, resulting ultrahigh sensitivity robust stability.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Piezoresistive Cement-based Materials for Strain Sensing

Cement-based materials that exhibit piezoresistivity with sufficient magnitude and reversibility contain electrically conductive fibers. The phenomenon allows the materials to sense their own strain. The fibers are preferably discontinuous. Carbon fibers (15mm diameter) are most effective. Steel fibers (8 mm diameter) are less effective. Carbon filaments (0.1 mm diameter) are ineffective. The p...

متن کامل

A New Technique based on Strain Energy for Correction of Stress-strain Curve

Tensile stress-strain curve is of high importance in mechanics of materials particularly in numerical simulations of material deformations. The curve is usually obtained by experiment but is limited by necking phenomenon. Engineering stress-strain curve is converted to true stress-strain curve through simple formulas. The conversion, however, is correct up the point of necking. From this point ...

متن کامل

Arbitrary Strain and Temperature Distribution Sensing Using Two FBG Pairs

We use two pairs of FBGs to perform simultaneous strain and temperature field measurements. The first pair of FBGs, comprising one uniform FBG and one chirped FBG, measures the strain and temperature fields, while the second pair of FBGs, also comprising one uniform FBG and one chirped FBG, measures the temperature field only. A genetic algorithm is applied to reconstruct the arbitrary strain a...

متن کامل

Strain-gated piezotronic logic nanodevices.

Fabrication of the strain-gated inverter (SGI) The SGI was fabricated by bonding two ZnO NWs laterally on a Dura-Lar film. The thickness of the Dura-Lar film is 0.5 mm. The ZnO NWs were synthesized via a physical vapor deposition method reported elsewhere [32] and typically have diameters of 300 nm and lengths of 400 μm (Fig. 1a). The films were first cleaned with acetone, isopropyl alcohol and...

متن کامل

Strain based panel elements for shear wall analysis

The finite element method (FEM) can be applied to practically analyze the tall buildings in which the shear walls are used to resist the lateral loads. Accordingly, a variety of displacement and strain-based as well as frame macro elements have been proposed for analysis of the tall buildings. With respect to application of the lower order plane stress elements, analytical problems may arise wi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advanced Materials

سال: 2023

ISSN: ['1521-4095', '0935-9648']

DOI: https://doi.org/10.1002/adma.202370013