Heavy oil upgrading using magnetic molybdenum disulfide catalyst
نویسندگان
چکیده
منابع مشابه
New Upgrading Process for Heavy Oil Using Iron/active Carbon Mixture Catalyst
The possibility of optimizing the composition and the structures of the nickel catalysts and the pretreatment and reaction conditions for carbon dioxide reforming with methane is investigated. The optimum catalyst and the pretreatment and reaction conditions are determined employing the orthogonal and uniform design methods. The optimum nickel catalyst gives promising catalytic performance in t...
متن کاملCharacterization of pore coking in catalyst for thermal down-hole upgrading of heavy oil
Heavy oil and bitumen are a potential alternative energy source to conventional light crude. However, recovery of these resources can have substantial environmental impact. Downhole upgrading offers the prospect of both improving recovery, and decreasing environmental impact. However, use of catalysts to enhance downhole upgrading is limited by the need for one that can survive the extreme coki...
متن کاملOxidation of Methanol using Carburized Molybdenum Catalyst
Molybdenum catalysts carburized in CH4/H2 exhibited activity for methanol electrooxidation (MOR) in half cell measurements. Mo carburized at 773 and 873 K showed high electrooxidation of methanol compared to carburization at other temperatures. Catalyst characterization was carried out by XRD and TPC. The active carbide species responsible to facilitate the MOR was the Mo oxycarbide and –Mo2C s...
متن کاملAn efficient molybdenum disulfide/cobalt diselenide hybrid catalyst for electrochemical hydrogen generation
The electroreduction of water for sustainable hydrogen production is a critical component of several developing clean-energy technologies, such as water splitting and fuel cells. However, finding a cheap and efficient alternative catalyst to replace currently used platinum-based catalysts is still a prerequisite for the commercialization of these technologies. Here we report a robust and highly...
متن کاملFormation of nanooctahedra in molybdenum disulfide and molybdenum diselenide using pulsed laser vaporization.
Pulsed laser vaporization has been used to produce nanooctahedra of MoS2 and MoSe2. The nanooctahedra primarily form in two- or three-layer nested octahedra, although nesting up to five layers has been observed. Tilting the TEM sample stage and mapping how the images of single particles transformed provided the evidence to verify their octahedral geometry. Analysis of 30 two- and three-layered ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2019
ISSN: 1757-899X
DOI: 10.1088/1757-899x/479/1/012074