Heavy Electrodeposition of Silver from Conventionally Concentrated Cyanide Baths.

Electrolytic recovery of silver from low concentrated silver cyanide spent plating solutions

Cyanide silver solution containing 200 to 1000 mg L silver ions were used for recovery studies. The nature of the silver deposit was studied using a Hull cell, and the current density range was selected for electrolysis to recover silver. A batch electrochemical reactor, consisting of a planar stainless steel cathode and platinum anode was used and silver was recovered at 0?04 to 0?2 A dm. The ...

Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths

Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (<0.5 mA/cm2), the c...

The Electrodeposition of Silver from Supercritical Carbon Dioxide/Acetonitrile

Electrodeposition of Alloys Coatings from Electrolytic Baths Prepared by Recovery of Exhausted Batteries for Corrosion Protection

ELECTRODEPOSITION OF Ni-Fe ALLOYS FROM SULFATE, SULFATE-CHLORIDE AND CHLORIDE BATHS

In an attempt to control the film composition, factors affecting the composition of Ni-Fe alloy deposits and their crystal structure have been analyzed as a function of bath composition, cathode current density, bath pH, temperature and an addition of citric acid. antimony electrode revealed that the deposition potential of Fe coincides with the potential where the abrupt increase of pH was obs...