Heat transfer pseudoplastic fluids in plate-type heat exchangers.
نویسندگان
چکیده
منابع مشابه
heat transfer of nano-fluids as working fluids of swimming pool heat exchangers
the present experimental study reports on enhancement of heat transfer by addition of nanoparticles to the working fluid of commercial swimming pool heat exchangers under laminar flow condition. three different concentrations of titanium dioxide nanoparticles were added to the water as working fluid of a typical forced convective heat exchanger used to transfer heat to public swimming pools. th...
متن کاملExperimental Study On R-134A Condensation Heat Transfer Characteristics In Plate And Shell Heat Exchangers
In this study, condensation heat transfer experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-134A. An experimental refrigerant loop has been established to measure the condensation heat transfer coefficient of R-134A in a vertical P&SHE. Two vertical counter flow channels were formed in the P&SHE by stacking three plates of geometry with a corrugated tr...
متن کاملHeat transfer and rheology of stirred yoghurt during cooling in plate heat exchangers
In the present work an experimental investigation was conducted to obtain a correlation for the determination of convective heat transfer coefficients of stirred yoghurt in a plate heat exchanger. A rheological study was carried out in order to characterise the stirred yoghurt flow behaviour, evaluating its dependency both on shear rate and temperature. A shift in the temperature dependency was...
متن کاملExperimental Heat Transfer Studies of Water in Corrugated Plate Heat Exchangers: Effect of Corrugation Angle
In the present investigations heat transfer studies are made in three different types of corrugated plate heat exchangers having a length of 30 cm and width of 10 cm. The corrugated channel has a spacing of 5 mm. Three different corrugation angles are used in this study which are 30 0 , 40 0 and 50 0 . Water is taken as test fluid as well as the heating medium. The wall temperatures are measure...
متن کاملDevelopment of C - SiC ceramic compact plate heat exchangers for high temperature heat transfer applications
This paper investigates the use of polymer and liquid silicon infiltrated carbon/siliconcarbide composite (C-SiC) materials for the development of inexpensive compact heat exchangers, as part of efforts for thermochemical hydrogen production. These heat exchangers will be capable of operating in the temperature range of 500 to 1400°C with highpressure helium, liquid fluoride salts (a potential ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KAGAKU KOGAKU RONBUNSHU
سال: 1990
ISSN: 0386-216X,1349-9203
DOI: 10.1252/kakoronbunshu.16.1110