Heat transfer model for PV module with cooling channel
نویسندگان
چکیده
منابع مشابه
Study of flow and heat transfer characteristics in a periodic zigzag channel for cooling of polymer electrolyte fuel cells
In this study, a periodic zigzag channel with rectangular cross-section has been used in order to obtain a high-efficiency system for cooling a polymer electrolyte fuel cell. An appropriate function of fuel cells and enhancement of their lifetime require uniform temperature conditions of around 80°C. On the other hand, due to volume and weight constraints, a low-density compact heat exchanger i...
متن کاملSingle-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module
This study examines the single-phase and two-phase cooling performance of a hybrid micro-channel/micro-jet impingement cooling scheme using HFE 7100 as working fluid. This scheme consists of supplying coolant from a series of jets that deposit liquid into the micro-channels. A single-phase numerical scheme that utilizes the k–e turbulent model and a method for determining the extent of the lami...
متن کاملTwo-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics
This paper is the second of a two-part study concerning two-phase flow and heat transfer characteristics of R134a in a micro-channel heat sink incorporated as an evaporator in a refrigeration cycle. Boiling heat transfer coefficients were measured by controlling heat flux (q00 = 15.9 93.8W/cm) and vapor quality (xe = 0.26 0.87) over a broad range of mass velocity. While prior studies point to e...
متن کاملTransverse Heat Transfer in a Cable-In-Conduit Conductor with Central Cooling Channel
The author hereby grants to MIT permission to reproduce and to distribute publicly paper and electronic copies of this thesis document in whole orpn part.
متن کاملTurbine Blade Tip Cooling and Heat Transfer
ii ACKNOWLEDGEMENTS Behind every success, there is inspiration or support of at least one person. In my case, it was a group of people including my mentor, my family, and my friends. First of all, I would like to thank Dr. Srinath Ekkad for his guidance, wisdom, and financial support. I do not think many advisors would go to the lab to help his student running an experiment. Whenever I had any ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2017
ISSN: 2267-1242
DOI: 10.1051/e3sconf/20171303004