Heat transfer increment study taking into consideration fin lengths for CuO-water nanofluid in cross flow-impinging jet flow channels
نویسندگان
چکیده
In this study, the heat transfer and flow characteristics for cube circular hollow models in channels with cross flow-impinging jet were numerically investigated by using water 2% CuO-Water nanofluid. The numerical work was carried out steady three-dimensional Ansys-Fluent program k-? turbulence model. A fin 45? 90? angles D, 1.166D, 1.333D (K) lengths added to upper channel surface from impinging inlet at D (N) distance. constant flux of 1000 W/m2 applied model surfaces. height is fixed 3D (H) Re number range fluids 5000-15000. results obtained study compared experimental literature it seen that compatible acceptable. examined as mean Nu number, temperature, performance evaluation coefficient (PEC) variations each channels. Also, velocity temperature contour distributions combined nanofluid visualized. average (Num) increases Re=15000, K=D and, angle are 32.55% 26.11% without fluid models, respectively.
منابع مشابه
An approximate model for slug flow heat transfer in channels of arbitrary cross section
In this paper, a novel approximate solution to determine the Nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. Using the Saint-Venant principle in torsion of beams, it is shown that the thermally developed Nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...
متن کاملNumerical study of flow and heat transfer characteristics of CuO/H2O nanofluid within a mini tube
Nanofluids are new heat transfer fluids, which improve thermal performance while reducing the size of systems. In this study, the numerical domain as a three-dimensional copper mini tube was simulated to study the characteristics of flow and heat transfer of CuO/H2O nanofluid, flowed horizontally within it. The selected model for this study was a two-phase mixture model. The results ...
متن کاملInvestigations on heat and momentum transfer in CuO-water nanofluid
This paper presents results of investigations on the application of CuO-water nanofluids for intensification of convective heat transfer. Performance of nanofluids with 2.2 and 4.0 vol.% CuO NPs (nanoparticles) content were examined with regard to heat transfer coefficient and pressure losses in case of turbulent flow in a tube. Negligible impact of examined nanofluid on heat transfer improveme...
متن کاملNanofluid impingement jet heat transfer
Experimental investigation to study the heat transfer between a vertical round alumina-water nanofluid jet and a horizontal circular round surface is carried out. Different jet flow rates, jet nozzle diameters, various circular disk diameters and three nanoparticles concentrations (0, 6.6 and 10%, respectively) are used. The experimental results indicate that using nanofluid as a heat transfer ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2023
ISSN: ['0354-9836', '2334-7163']
DOI: https://doi.org/10.2298/tsci221203035k