Heat Transfer from Circular Pipes under Corona Discharge
نویسندگان
چکیده
منابع مشابه
Convective heat transfer in foams under laminar flow in pipes and tube bundles.
The present study reports experimental data and scaling analysis for forced convection of foams and microfoams in laminar flow in circular and rectangular tubes as well as in tube bundles. Foams and microfoams are pseudoplastic (shear thinning) two-phase fluids consisting of tightly packed bubbles with diameters ranging from tens of microns to a few millimeters. They have found applications in ...
متن کاملNumerical simulation of laminar convection heat transfer from an array of circular perforated fins
The present paper reports the laminar fluid flow and heat transfer of a heated array of circular-perforated and solid fins mounted over a flat surface using the finite-volume method. One to four circular cross-sectional perforations are made along the length of the fins. The SIMPLE algorithm is used for pressure-velocity coupling and the second order upwind technique is employed to discreti...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کاملComparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics
Steel pipes with circular cross-sections are usually used in cooling panels of electric arc furnaces. In the present study pipes with square cross-sections under equivalent conditions were used to obtain more information on the possibility of increasing the heat transfer and cooling efficiency. The results showed increased efficiency of the square pipe compared to the circular cross-section pip...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KAGAKU KOGAKU RONBUNSHU
سال: 1978
ISSN: 0386-216X,1349-9203
DOI: 10.1252/kakoronbunshu.4.366