Heat Transfer from an Inflow-Type Swirling Turbulent Impinging Jet
نویسندگان
چکیده
منابع مشابه
Heat Transfer Characteristics of Swirling Impinging Jets
Impinging jets are used in a wide number of industrial cooling applications due to their high heat and mass transfer abilities. The current research is concerned with the effect of swirl on the heat transfer characteristics of jet impingement cooling. Two inserts were designed order to generate swirling flow. These two designs, “Swirl Insert A” and “Swirl Insert B”, were tested at various Reyno...
متن کاملPrediction of turbulent heat transfer in impinging jet geometries
This chapter summarizes the current knowledge on the numerical prediction of turbulent impinging jet flows. The predictive capabilities of numerical models are evaluated by careful comparison with experimental fluid flow and heat transfer data. Turbulent fluctuations in the velocity field are mathematically modelled using the Reynolds Averaged Navier–Stokes (RANS) methodology. Turbulence is ass...
متن کاملHeat Transfer of an Impinging Jet on a Plane Surface
Abstract—A cold, thin film of liquid impinging on an isothermal hot, horizontal surface has been investigated. An approximate solution for the velocity and temperature distributions in the flow along the horizontal surface is developed, which exploits the hydrodynamic similarity solution for thin film flow. The approximate solution may provide a valuable basis for assessing flow and heat transf...
متن کاملModeling of Heat Transfer in a Mist/Steam Impinging Jet
The addition of mist to a flow of steam or gas offers enhanced cooling for many applications, including cooling of gas turbine blades. The enhancement mechanisms include effects of mixing of mist with the gas phase and effects of evaporation of the droplets. An impinging mist flow is attractive for study because the impact velocity is relatively high and predictable. Water droplets, less than 1...
متن کاملHeat transfer enhancement from micro pin fins subjected to an impinging jet
An experimental investigation was carried out to study the single-phase stagnation point jet impingement heat transfer on smooth and micro pin fin structures using water and R134a. The experiments were carried out for a single jet (dj = 2.0 mm) impinging on a 2 2 mm micro-heater over a wide range of Reynolds numbers. Both an unfinned and a micro structured impingement surfaces were investigated...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series B
سال: 2006
ISSN: 1340-8054,1347-5371
DOI: 10.1299/jsmeb.49.995