Heat transfer enhancement in packed bed solar air heater

Experimental Investigations on Packed Bed Solar Air Heater

Effect of depth ratio on the thermal performance of double flow packed bed solar air heater

In this paper double flow packed bed solar air heater has been investigated theoretically. The effect of air mass flow rate, porosity and different depth ratios at study state conditions on the thermal performance of a double flow packed bed solar air heater is found by using the alternative simulation system. Comparisons between the measured thermal and effective thermal efficiency of the doub...

Enhancement of heat transfer coefficient using Diamond shaped roughness on the absorber plate of solar air heater

Solar collector (Air heater) has low thermal efficiency due to the low thermal conductivity between Air and absorber plate. So there is a need to enhance the thermal conductivity between air and absorber plate. This leads higher temperature to absorber plate and hence maximum thermal losses occurs to environment .It can be made possible by creating artificial roughness on absorber plate .There ...

Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater

The thermal performance of a single pass solar air heater with five fins attached was investigated experimentally. Longitudinal fins were used inferior the absorber plate to increase the heat exchange and render the flow fluid in the channel uniform. The effect of mass flow rate of air on the outlet temperature, the heat transfer in the thickness of the solar collector, and the thermal efficien...

Sizing of a Packed Bed Storage for Solar Air Heating Systems (TECHNICAL NOTE)

Packed bed units generally, represent the most suitable storage units for air heating solar systems. In these systems the storage unit receives the heat from the collector during the collection period and discharges the heat to the building at the retrieval process. A method for sizing of packedbed storage in an air heating system is represented. The design is based on the K-S curves, which hav...