Heat Transfer Enhancement Analysis of Collector Tube in LFR-CSP

Investigation of Heat Transfer Coefficient Enhancement for CuO/TiO2 Nanocomposite in a Tube Heat Exchanger

In order to improve the efficiency and rate of heat transfer in heat exchangers, various techniques such as increasing the heat transfer coefficient are proposed. This study is devoted to the investigation of heat transfer coefficient variations due to the addition of CuO, TiO2 and CuO/TiO2 nanoparticles into a shell and tube heat exchanger. CuO/TiO2 nanocomposite was synthesized using mechanic...

Convective Heat Transfer Enhancement of CNT-Water Nanofluids in Plain Tube Fitted with Wire Coil Inserts

Experimental Study on Heat Transfer Performance of Vacuum Tube Heat Collector with Thermal Storage

This experimental study is intended to explore the heat performance of a novel vacuum tube heat collector with thermal storage. In order to enhance the heat transfer performance, we add radial metal fins to the U-tube which is used as the heat transfer channel of water. Meanwhile, in order to increase the thermal capacity of the heat collector, the heat collector model is designed to be larger ...

Enhancement of Natural Convection Heat Transfer in Annular Enclosures

Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105  to 5 x 106...

Analysis of Heat Transfer Enhancement in Spiral Plate Heat Exchanger

In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...