Heat Transfer between Metallic Surfaces in Contact : 3rd Report, The Effects of the Oxidization of Contact Surfaces
نویسندگان
چکیده
منابع مشابه
Effect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملThermal Contact Resistance of Wavy Surfaces (RESEARCH NOTE)
In this paper, the method of determining thermal contact resistance of wavy surfaces is discussed exactly. For determining the thermal contact resistance of real contacts, a new method has been presented. In this method, assuming a regular sinusoidal surface profile, the real contact area in terms of applied forces has been determined. Then thermal contact resistance has been calculated. Testin...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Sliding contact between freeform surfaces
This paper deals with the sliding-contact constraint equations describing the relative motion of two freeform surfaces, assuming that the surfaces can have arbitrary curvature in 3D space. The sliding-contact equations are developed either for the non-penetration condition and for the surface-tangency condition. Both are differentiated twice in time in order to allow a straightforward applicati...
متن کاملContact between representative rough surfaces.
A numerical analysis of mechanical frictionless contact between rough self-affine elastic manifolds was carried out. It is shown that the lower cutoff wave number in surface spectra is a key parameter controlling the representativity of the numerical model. Using this notion we demonstrate that for representative surfaces the evolution of the real contact area with load is universal and indepen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1967
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.33.1120