Heat transfer and thermo-mechanical stresses in a gravity casting die

Residual Stresses in Castings Produced by Press Die Casting Technology

D. Novoselović, I. Budić, I. Samardžić, Mechanical Engineering Faculty in Slavonski Brod, University of Osijek, Croatia The influence of technological parameters on residual stresses in pressure die castings is analysed in this paper. In order for the residual stresses to be as low as possible the optimization of technological parameters is necessary. The centrally composed plan of experiment 2...

Study of Process Parameters of Gravity Die Casting Defects

In today’s world a casting production without any defect is almost impossible. After the application of various optimization techniques and process we still are not able to get the defect free castings. So it is critically important to analyze the root cause of casting defect with in the process itself, so that any changes which can hamper the defect intensity can be invoked at the time of manu...

Utilization of Plc Programming for Gravity Die Casting Automation

Under the present regime of globalization and liberalization, quality enhancement and cost reduction are two major steps to enhance productivity in major Industries. We focused on the very practical, safe, economical and rewarding strategies i.e. the application of LOW COST AUTOMATION. In Industry which uses of automation, a sequence is followed in the manufacturing of number of products of the...

Semisolid Processing of Al/β-SiC Composites by Mechanical Stirring Casting and High Pressure Die Casting

“ Microstructural and mechanical properties of eutectic Al – Si alloy with grain refined and modified using gravity - die and sand casting ”

This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...