Heat transfer and Thermal Stress Analysis in Internal Grooved tube in comparison with bare tube by Finite element method
نویسندگان
چکیده
منابع مشابه
Thermal Design Considerations and Performance Evaluation of Cryogenic Tube in Tube Heat Exchangers
Heat exchangers are the most important equipment in refrigeration processes. Design and modeling of heat exchangers operating at low temperatures are different from other regular heat exchangers. This study includes two sections. In the first section, design and modeling considerations needed for evaluating the real thermal behavior of heat exchangers at low temperatures were discussed. The...
متن کاملHeat Transfer Characteristics of the Non-uniform Grooved Tube considering Tube Expansion
A plate-fin heat exchanger is a type of heat exchanger widely used in air conditioners, and tubes and fins are tightly assembled by the mechanical expansion process of tubes. The tube expansion process deforms the grooves inside the tube, and the groove shapes also affect the adhesion between tubes and fins. In this study, the adhesion and heat transfer performance affected by the tube expansio...
متن کاملTube Temperature Distribution in Water Tube Boiler- A Parametric Study by Finite Element Method
This paper presents the application of finite element method (FEM) to analyze the tube temperature distribution in a water tube boiler. Two-dimensional (2-D) finite element models are developed where the axi-symmetric triangular elements for the cross section area along the water tube are applied in computer software namely MSC Patran-Nastran. The analysis of the temperature distribution for ev...
متن کاملInvestigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method
In ultrasonic tube hydroforming, the tube is hydro formed while the ultrasonic vibration is applied to the die. Prior studies provide experimental proof that ultrasonic tube hydroforming reduces corner radius, improves lubrication and uniform thickness. Use of ultrasonic vibration can decrease friction at the tube-die interface. Few attempts have been made to analyze the wire drawing while the ...
متن کاملSelecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters
Tubular structural systems are one of the most common types of systems in high-rise structures. In the early days of this system, there were imperfections in its design which were overcome over time. The most important modification to rectify these defects is the use of a series of internal frames in addition to the peripheral frames and new systems in the center of the plan to eliminate design...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Current Engineering and Technology
سال: 2010
ISSN: 2277-4106
DOI: 10.14741/ijcet/spl.2.2014.74