Heat Transfer and Pressure Drop Characteristics of Brazed Plate Heat Exchangers with Single-Phase Flow
نویسندگان
چکیده
منابع مشابه
Heat Transfer and Pressure Drop During HC-600a (Isobutane) Condensation Inside a Brazed Plate Heat Exchanger
This paper presents the heat transfer coefficients and the pressure drop measured during HC-600a (Isobutane) condensation inside a brazed plate heat exchanger: the effects of saturation temperature, refrigerant mass flux and vapour super-heating are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature and great sensitivity to refrigerant mass flux. At low...
متن کاملHeat Transfer and Pressure Drop Characteristics in Straight Microchannel of Printed Circuit Heat Exchangers
Performance tests were carried out for a microchannel printed circuit heat exchanger (PCHE), which was fabricated with micro photo-etching and diffusion bonding technologies. The microchannel PCHE was tested for Reynolds numbers in the range of 100‒850 varying the hot-side inlet temperature between 40 °C–50 °C while keeping the cold-side temperature fixed at 20 °C. It was found that the average...
متن کاملThe Characteristics of Brazed Plate Heat Exchangers with Different Chevron Angles
Plate heat exchangers (PHEs) were introduced in the 1930s and were almost exclusively used as liquid/liquid heat exchangers in the food industries because of their ease of cleaning. Over the years, the development of the PHE has generally continued towards larger capacity, as well as higher working temperature and pressure. Recently, a gasket sealing was replaced by a brazed material, and each ...
متن کاملnumerical investigation of heat transfer and pressure drop in a plate heat exchanger with chevron plates
in the present study, turbulent flow in channels of a plate heat exchanger with corrugated chevron plates has been simulated numerically using the commercial cfd package, fluent. unstructured mesh is used for discretizing the computational domain and simple algorithm is utilized to solve the pressure and velocity equations. there is a wide selection of different plate heat exchangers within the...
متن کاملFluid Flow and Heat Transfer of Nanofluids over a Flat Plate with Conjugate Heat Transfer
The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Air-Conditioning and Refrigeration Engineering
سال: 2014
ISSN: 1229-6422
DOI: 10.6110/kjacr.2014.26.11.522