Heat Transfer Analysis in Automotive Exhaust System using Liquid Jet Cooling
نویسندگان
چکیده
منابع مشابه
Experimental Heat Transfer Enhancement in Single-phase Liquid Microchannel Cooling with Cross-flow Synthetic Jet
The present study experimentally investigated a new hybrid cooling scheme by combination of a microchannel heat sink with a micro-synthetic jet actuator. The heat sink consisted of a single rectangular microchannel measured 550 μm wide, 500 μm deep and 26 mm long. The synthetic jet actuator with a 100 μm diameter orifice was placed right above the microchannel and 5 mm downstream from the chann...
متن کاملHigh Heat Flux Cooling by Liquid Jet-Array Modules
Heat removal at high power density is a continually challenging problem. Traditionally, the highest heat fluxes have been removed by flow boiling systems, for which critical heat flux is the usual limiting factor. Indeed, the highest steady-state heat fluxes obtained have generally been CHF values for tube flows of water, with maximum critical fluxes in the range of 100 to 350 MW/m. These heat ...
متن کاملExperimental Investigation of Heat Transfer Enhancement in a Finned U-Shaped Heat Pipe of CPU Cooling System Using Different Fluids
This paper experimentally studies the heat absorption performance of a heat sink with vertical embedded heat pipes in the aluminum blade. The cooling system with embedded heat pipes distributes heat from the CPU to both the base plate and the heat pipes, and then transfer heat from fins to the Environment. The thermal resistance and heat transfer coefficient are evaluated for natural convection...
متن کاملExperimental Heat Transfer Enhancement for Single Phase Liquid Micro-Channel Cooling Using A Micro-Synthetic Jet Actuator
The present work experimentally investigates the thermal effects of a synthetic jet actuator on the heat transfer performance of single-phase flow confined in a microchannel heat sink. The heat sink consisted of a single rectangular microchannel 500 μm wide, 300 μm deep and 26 mm long. Deionized water was employed as the cooling fluid. A synthetic jet actuator with a 100 μm diameter orifice was...
متن کاملNanofluid impingement jet heat transfer
Experimental investigation to study the heat transfer between a vertical round alumina-water nanofluid jet and a horizontal circular round surface is carried out. Different jet flow rates, jet nozzle diameters, various circular disk diameters and three nanoparticles concentrations (0, 6.6 and 10%, respectively) are used. The experimental results indicate that using nanofluid as a heat transfer ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Innovative Research in Science, Engineering and Technology
سال: 2015
ISSN: 2347-6710,2319-8753
DOI: 10.15680/ijirset.2015.0406049