Heat source free water floating carbon nanotube thermoelectric generators
نویسندگان
چکیده
Abstract Thermoelectric generators (TEGs) produce electric power from environmental heat energy and are expected to play a key role in powering the Internet of things. However, they require source create stable irreversible temperature gradient. Overcoming these restrictions will allow use TEGs proliferate. Therefore, we propose source-free water-floating carbon nanotube (CNT) TEGs. Output voltage generated by gradient CNT films which water pumping via capillary action leads evaporation-induced cooling selected areas. Furthermore, output increase when exposed sunlight wind flow. These demonstrate pathway for developing wireless monitoring systems environments.
منابع مشابه
Heat Management in Thermoelectric Power Generators
Thermoelectric power generators are used to convert heat into electricity. Like any other heat engine, the performance of a thermoelectric generator increases as the temperature difference on the sides increases. It is generally assumed that as more heat is forced through the thermoelectric legs, their performance increases. Therefore, insulations are typically used to minimize the heat losses ...
متن کاملDevelopment of Thermoelectric Generators for the Waste Heat Recovery
To design and analyse a model that can utilize the waste heat energy from various sources like heat energy obtained the car engines exhaust system and to convert obtained heat energy into electricity for multipurpose use in automobiles. Many considerations have been taken to make this system economical, easy to implement and does not produce any burden on car efficiency or engine efficiency. Th...
متن کاملThermal performance of two heat exchangers for thermoelectric generators
The thermal performance of a heat exchanger is important for the potential application in an integrated solar cell/module and thermoelectric generator (TEG) system. Usually, the thermal performance of a heat exchanger for TEGs is analysed by using 1D heat conduction theory which ignores the detailed phenomena associated with thermo-hydraulics. In this paper, thermal and momentum transports in t...
متن کاملConstant heat characterisation and geometrical optimisation of thermoelectric generators
It is well known that for a thermoelectric generator (TEG) in thermal steady-state with constant temperature difference across it the maximum power point is found at half of the open-circuit voltage (or half of the short-circuit current). However, the effective thermal resistance of the TEG changes depending on the current drawn by the load in accordance with the parasitic Peltier effect. This ...
متن کاملCo-optimized design of microchannel heat exchangers and thermoelectric generators
Designs of heat exchangers have mostly been disconnected to the performance of thermoelectric generator (TEG) systems. The development work, mostly focused on thermoelectric materials, required a significant amount of engineering parametric analysis. In this work, a micro plate-fin heat exchanger applied to a TEG is investigated and optimized to maximize the output power and the cost performanc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2021
ISSN: ['2045-2322']
DOI: https://doi.org/10.1038/s41598-021-94242-0