Heat of combustion of tantalum–tungsten oxide thermite composites
نویسندگان
چکیده
منابع مشابه
Heat transfer modelling of rail thermite welding
Rail thermite (or Thermit) welding is a valuable welding technology for the railway industry because of its simplicity, portability, and economy. Using the finite-element method, a heat transfer analysis is conducted in this study. Only the heat transfer by conduction was simulated explicitly in the model, the other thermally significant phenomena were included through the boundary and initial ...
متن کاملComputational Modeling of Combustion Wave in Nanoscale Thermite Reaction
Nanoscale thermites such as the composite mixture of nano-sized aluminum and molybdenum trioxide powders possess several technical advantages such as much higher reaction rate and shorter ignition delay, when compared to the conventional energetic formulations made of micron-sized metal and oxidizer particles. In this study, the self-propagation of combustion wave in compacted pellets of nanosc...
متن کاملCombustion Synthesis of Titanium-Tungsten Carbide Composites in Iron Matrix
Combustion synthesis has been used to produce Fe-(Ti,W)C composites. A simple reactor was designed which made it possible to ignite the samples under controlled atmosphere. Samples with different W/Ti ratio were ingnited under argon atmosphere by an electric arc and a self-propagating reaction was initiated in each sample. Different composites such as WC in Fe-Ti matrix, WC+(Ti,W)C in Fe matrix...
متن کاملCombustion Synthesis of Titanium-Tungsten Carbide Composites in Iron Matrix
Combustion synthesis has been used to produce Fe-(Ti,W)C composites. A simple reactor was designed which made it possible to ignite the samples under controlled atmosphere. Samples with different W/Ti ratio were ingnited under argon atmosphere by an electric arc and a self-propagating reaction was initiated in each sample. Different composites such as WC in Fe-Ti matrix, WC+(Ti,W)C in Fe matrix...
متن کاملCombustion-aminolysis synthesis and characterization of CrN/Cu composites
CrN/Cu composite powders were synthesized by employing a novel two-step technique. Firstly, the Cr2O3+CuO precursors were prepared by the solution combustion synthesis (SCS) method using cupric nitrate, urea, and chromium nitrate as initial materials. Subsequently, the SCS precursors were calcined at 850 °C in NH3 for 6 h, and transformed to CrN/Cu composite powders. The composite powders consi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Combustion and Flame
سال: 2010
ISSN: 0010-2180
DOI: 10.1016/j.combustflame.2010.07.002