Heat Management in Gas Switching Combustion for Power Production with Integrated CO2 Capture
نویسندگان
چکیده
منابع مشابه
Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملTwo novel oxy-fuel power cycles integrated with natural gas reforming and CO2 capture
Two novel system configurations were proposed for oxy-fuel natural gas turbine systems with integrated steam reforming and CO2 capture and separation. The steam reforming heat is obtained from the available turbine exhaust heat, and the produced syngas is used as fuel with oxygen as the oxidizer. Internal combustion is used, which allows a very high heat input temperature. Moreover, the turbine...
متن کاملSelective Exhaust Gas Recirculation in Combined Cycle Gas Turbine Power Plants with Post-combustion Carbon Capture
.................................................................................................................................... ii Acknowledgements .................................................................................................................. iii Declaration of originality .....................................................................................................
متن کاملA computational investigation on the structural features of alkanolamine solvents for CO2 capture process from power plant flue gas
متن کامل
Flue gas treatment for CO2 capture
This report is in two sections: the first describes the flue gas and its treatment in post-combustion capture and the second covers the flue gas in oxyfuel combustion capture. The main components of the flue gas in pulverised coal combustion for postcombustion capture are CO2, N2, O2 and H2O, and air pollutants such as SOx, NOx, particulates, HCl, HF, mercury as well as other contaminants. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2015
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2015.07.386