HEAT AND MASS TRANSFER IN TUBULAR SOLAR STILL UNDER STEADY CONDITION
نویسندگان
چکیده
منابع مشابه
Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition
Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...
متن کاملHeat and Mass Transfer in Tubular Inorganic Membranes
In this work heat and mass transfer in tubular asymmetric ceramic membranes suitable for applications in membrane reactors have been investigated. An experimental matrix has been employed to quantify the heat and mass transfer in the membrane, which leads to the identification and validation of respective parameters in a comprehensive and consistent manner. Two types of membranes have been inve...
متن کاملHeat and Mass Transfer in Fixed-bed Tubular Reactor
Heat and mass transfer problem in a fixed-bed tubular reactor is one of the major concerns in the chemical engineering. The two dimensional axial plug flow model was used for a water gas shift reactor to compare heat conduction or mass diffusion with convective effect. In the case of fast fluid flow in highly permeable catalyst-bed, convective heat transfer was dominant compared to heat conduct...
متن کاملHeat and Mass Transfer in Leather Drying Process
Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. Determining drying characteristics of leather is vitally important so as to optimize the drying stage. This paper describes an analytical way for determination of the drying characteristics of leather. The model presented, is based on fundamental heat and mass tra...
متن کاملFlow Analysis Heat and Mass Transfer in a Room
This reports the study on the flow behaviour, heat transfer and contamination distribution in a room. For this purpose the 3-D incompressible Navier-Stokes equations, energy equation and a mass transfer equation which model the concentration of contamination have been applied. For turbulence simulation the two equation standard k- turbulence model was employed. By means of SIMPLE algorithm the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PROCEEDINGS OF HYDRAULIC ENGINEERING
سال: 2005
ISSN: 0916-7374,1884-9172
DOI: 10.2208/prohe.49.727