Heat and Fluid Flow Properties of Circular Impinging Jet with a Low Nozzle to Plate Spacing. Improvement by Nothched Nozzle.
نویسندگان
چکیده
منابع مشابه
Effect of Nozzle-Plate Distance on Acoustic Phenomena from Supersonic Impinging Jet
This study investigates the effect of nozzle-plate distance on the acoustic phenomena from a correctly expanded supersonic jet impinging on an inclined flat plate. In the authors’ previous study, the overall sound-pressure-level (OASPL) in the direction almost perpendicular to the plate from the impingement region became highest when the nozzle-plate distance was 15D (D, the nozzle exit diamete...
متن کاملFluid Flow And Heat Transfer Analysis Of Turbulent Multiple Circular Jets Impinging On A Flat Plate
Computations and Experiment investigations on a Flat plate and reported with constant heat flux imposed on bottom surface and five circular jets impinges on a top surface .The five circular jets consists of a central jet surrounded by four neighboring perimeter jets .Lampblack flow visualization technique and computation using shear stress transformation (K-ω) turbulent model and employed to de...
متن کاملNoise Generation in the Near-Nozzle Region of a Chevron Nozzle Jet Flow
This paper reports on the simulation of the near-nozzle region of a moderate Reynolds number cold jet flow exhausting from a chevron nozzle. The chevron nozzle considered in this study is the SMC001 nozzle experimentally studied by the researchers at the NASA Glenn Research Center. This nozzle design contains six symmetric chevrons that have a five-degree penetration angle. The flow inside the ...
متن کاملHybrid RANS/LES of plane jets impinging on a flat plate at small nozzle-plate distances
A k-ω based hybrid RANS/LES (Reynolds-averaged Navier–Stokes/large eddy simulation) model is tested for simulation of plane impinging jets at various nozzle-plate distances (H/B), where H is the distance and B is the slot’s width) and various Reynolds numbers (based on the slot’s width and the velocity in the symmetry plane). The studied combinations are H/B = 2 for Re = 10 000, H/B = 4 for Re ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2000
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.66.650_2655