Heat accumulation during pulsed laser materials processing: erratum
نویسندگان
چکیده
منابع مشابه
Heat accumulation during pulsed laser materials processing.
Laser materials processing with ultra-short pulses allows very precise and high quality results with a minimum extent of the thermally affected zone. However, with increasing average laser power and repetition rates the so-called heat accumulation effect becomes a considerable issue. The following discussion presents a comprehensive analytical treatment of multi-pulse processing and reveals the...
متن کاملInteraction Between Pulsed Laser and Materials
The research on laser-matter interaction can bridge the gap between practical problems and applications of lasers, which offers an important way to study material properties and to understand intrinsic microstructure of materials. The laser irradiation-induced effects on materials refer to numerous aspects, including optical, electromagnetic, thermodynamic, biological changes in material proper...
متن کاملPulsed Laser Ablation Deposition and Laser Interaction with Materials
PULSED LASER ABLATION DEPOSITION AND LASER INTERACTION WITH MATERIALS 2.
متن کاملInterface kinetics during pulsed laser ablation
This work investigates evaporation kinetics — the relation between the surface temperature and pressure during excimer laser ablation. Nickel targets are ablated by excimer laser pulses in a laser fluence range between 1 and 6 J/cm2, with the upper limit exceeding the threshold of phase explosion (5 J/cm2). The surface pressure is determined with a polyvinylidene fluoride (PVDF) piezoelectric t...
متن کاملNanosecond-time-resolution thermal emission measurement during pulsed excimer-laser interaction with materials
A nanosecond-time-resolution pyrometer has been developed for measuring the transient surface temperature of a solid material heated by pulsed excimer-laser irradiation. Fast germanium diodes are employed to capture the transient thermal emission signals in the wavelength range between 1.2 and 1.6 lm. The surface temperature is derived from the measured spectral thermal emission. The directiona...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2014
ISSN: 1094-4087
DOI: 10.1364/oe.22.028232