HCF behavior of material Tc17 considering surface roughness Ra
نویسندگان
چکیده
Surface scratch has significant influence on the fatigue behavior of Ti-5Al-2Zr-4Mo-4Cr. In this paper, test with three different surface roughness are conducted, results recorded, including data and fracture characteristics. The distribution is analyzed characteristics discussed according to change roughness. Study Ti-5Al-2Zr-4Mo-4Cr intheoretical engineering study.
منابع مشابه
Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملSEISMIC BEHAVIOR OF SILOS WITH DIFFERENT HEIGHT TO DIAMETER RATIOS CONSIDERING GRANULAR MATERIAL-STRUCTURE INTERACTION
Silos are structures that are used for storing different types of granular material. Dynamic behavior of silos under seismic loads is very complex. In this paper seismic behavior of steel silos with different height to diameter ratios is investigated by considering granular material-structure interaction using ABAQUS finite element package. Silo wall is modeled by shell elements and its behavio...
متن کاملSurface roughness, asperity contact and gold RF MEMS switch behavior
Modeling predictions and experimental measurements were obtained to characterize the electro-mechanical response of radio frequency (RF) microelectromechanical (MEM) switches due to variations in surface roughness and finite asperity deformations. Three-dimensional surface roughness profiles were generated, based on a Weierstrass–Mandelbrot fractal representation, to match the measured roughnes...
متن کاملEffect of surface treatments on damping behavior of carbon and glass fiber reinforced friction material
The ability to absorb vibrations in a vehicle during braking conditions depends primarily on the selection of ingredients for a friction material and interfacial adhesion between all these ingredients. In this work, a hybrid brake friction material is developed by combination of carbon fiber (CF), glass fiber (GF), resin and other ingredients. The surfaces of carbon and glass fibers are c...
متن کاملDeformation Analysis of Balloon-Expandable Stents Considering Its Surface Roughness and Viscoplasticity
Stent implantation is a well-known non-surgical method to treat vascular diseases. As one of object implanted in the human body, it should have certain surface roughness. De Palma et.al (1972) reported that surface roughness beyond the scale of a micrometer strongly hinders the process of surface passivation, thus it will lead to thrombus formation. Rough-ness of biomaterial implant turned out...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC web of conferences
سال: 2022
ISSN: ['2261-236X', '2274-7214']
DOI: https://doi.org/10.1051/matecconf/202235501019