$$\hbox {Fe}/\hbox {Fe}_{3}\hbox {O}_{4}$$ Fe / Fe 3 O 4 nanocomposite powders with giant high magnetization values by high energy ball milling

Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling

The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...

EVect of high energy ball milling on titanium– hydroxyapatite powders

to bone are concerned are brittle materials as exempliŽ ed by hydroxyapatite and ‘Bioglass’. Bioactive coatings are This paper reports on an investigationof the potential employed on metal implants to facilitate bonding to bone use of high energy ball milling (HEBM) for the while retaining the good combination of mechanical production of homogeneous mixtures of titanium/ properties associated w...

Phonon density of states of nanocrystalline Fe prepared by high-energy ball milling

We performed inelastic neutron scattering measurements on nanophase Fe powders prepared by high-energy ball milling. Neutron energy loss spectra were measured for two states of the material: ~1! as milled, when the material had a characteristic nanocrystallite size of 12 nm; and ~2! annealed, when the material had a characteristic crystallite size of 28 nm. The longitudinal peak in the phonon d...

Fe-AI,O, nanocomposites prepared by high-energy ball m illing

Formation of glassy Ti50Cu20Ni24Si4B2 alloy by high-energy ball milling

The elemental powder mixtures with a nominal composition of Ti50Cu20Ni24Si4B2 can be amorphized under high-energy ball milling. A well-defined glass transition before crystallization appears in the obtained amorphous phase during heating in a differential scanning calorimeter. Awide supercooled liquid region DTx is available to be about 57 K. Crystallization of the ballmilled amorphous phase wa...