Hardness of Ductile Cast Iron Castings and its Control in Praxis

Undercooling and nodule count in thin walled ductile iron castings

The filtration of large grey and ductile iron castings

Filtration of mass produced automobile castings is widely and successful applied, less common and more difficult is the filtration of large castings heavier than 1.000 kg. The paper deals with the special problems of applying filtration to such castings including; filter selection, description of three special filtration gating system concepts, along with ten case studies are given.

Effect of Melting Techniques on Ductile Iron Castings Properties

Ductile iron is one of the most important engineering materials, in view of its excellent castability, signifi cantly better mechanical properties and low cost [1, 2]. It represents the fastest growing segment of the iron market. In the medium term, it is to be expected that the market share of nodular iron will level off at 40 % to 45 % [3]. Achieving the full potential of ductile iron require...

Fatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts

Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...

petrology and geochemistry of khar-bash (western shahrood) and its relation ship to iron mineralization

منطقه مورد مطالعه در 23 کیلومتری جنوب غرب شهرستاشاهرود قرار دارد که در نقشه 100000/1 شاهرود قرار گرفته است.ناحیه مورد مطالعه در تقسیمات ساختاری ایران بخشی از زون البرز شرقی است . در طی سنوزوئیک این زون به شدت تحت تأثیر فازهای کوهزایی آلپی قرار گرفته و فعالیت های آتشفشانی انوسن در قسمت های غربی آن دیده می شود . از نظر ترکیب سنگ شناسی منطقه مورد مطالعه متنوع و بیشتر شامل سنگ های رسوبی مانند : آ...