Hard Disk Drive Mechanism Vibration Damping Using Disturbance Observer
نویسندگان
چکیده
منابع مشابه
Hard Disk Drive via LMIs
In this paper, and mixed / controllers are designed for a hard disk drive (HDD) using linear matrix inequalities (LMIs). In the proposed algorithm, the problem of minimizing track misregistration (TMR) in the presence of unmodeled dynamics of voice-coil motor (VCM) is formulated as robust and mixed / problems. Additional stack variables are introduced to characterize and performances. The simul...
متن کاملH1 disturbance observer design for high precision track following in hard disk drives
Contrary to the conventional method of disturbance observers (DOB) where Q-filter is designed to be a low-pass filter with unity DC gain, the optimal H1 method has been proposed to design the Q-filter and applied in the servo control system of hard disk drives in track following. Simulation and implementation results have shown that the resultant H1 DOB improves low-frequency disturbance attenu...
متن کاملFundamentals of Hard Disk Drive Acoustics
FIGURE 1 Acoustic Intensity Spectrum for a Typical Disk Drive Under Idle and Seek Operation Conditions. INTRODUCTION In the hard drive industry, drive acoustics are becoming more important than ever. With the introduction of hard drives into new emerging markets in which the consumer is more keenly aware of and sensitive to radiated acoustic noise issues, technical professionals are facing enor...
متن کاملNonlinear Mid-frequency Disturbance Compensation in Hard Disk Drives
In single-stage hard disk drives (HDDs), it is difficult to suppress midfrequency narrow band disturbances caused by disk flutter or windage effectively. This article presents a nonlinear compensation scheme to deal with narrow band disturbance around 1 kHz. The nonlinear compensator that provides additional phase lead without degrading the magnitude characteristic is proposed. This scheme is u...
متن کاملDisturbance Suppression beyond Nyquist Frequency in Hard Disk Drives
In conventional hard disk drives, a control system compensates for vibration in which the frequency is higher than the Nyquist frequency by using a multi-rate filter that decreases the gain above the Nyquist frequency. However, such a control system can only avoid instability and cannot suppress disturbances above the Nyquist frequency. In response to this problem, a control system design metho...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Universal Journal of Control and Automation
سال: 2014
ISSN: 2331-6489,2331-6500
DOI: 10.13189/ujca.2014.020402