Hall-Petch Hardening in Pulsed Laser Deposited Nickel and Copper Thin Films
نویسندگان
چکیده
منابع مشابه
Hall-petch Hardening in Pulsed Laser Deposited Nickel and Copper Thin Films
Very fine-grained Ni and Cu films were formed using pulsed laser deposition on fised silica substrates. The grain sizes in the films were characterized by electron microscopy, and the mechanical properties were determined by ultra-low load indentation, with iinite-element modeling used to separate the properties of the layers from those of the substrate. Some Ni films were also examined after a...
متن کاملPulsed laser deposited GeTe-rich GeTe-Sb2Te3 thin films
Pulsed laser deposition technique was used for the fabrication of Ge-Te rich GeTe-Sb2Te3 (Ge6Sb2Te9, Ge8Sb2Te11, Ge10Sb2Te13, and Ge12Sb2Te15) amorphous thin films. To evaluate the influence of GeTe content in the deposited films on physico-chemical properties of the GST materials, scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffraction and reflectometry, atomic fo...
متن کاملYoung’s modulus of pulsed-laser deposited V6O13 thin films
The mixed valence vanadium oxide V6O13 is an interesting material which exhibits an insulator-to-metal or semiconductor-to-semiconductor transition at low temperatures. It is also a much studied cathode material for lithium-based thin film batteries. However, there is little information available about its mechanical properties. Young’s modulus of pulsed-laser deposited V6O13 thin films has bee...
متن کاملMagnetic anisotropy and field switching in cobalt ferrite thin films deposited by pulsed laser ablation
We report the observation of contrasting magnetic behavior in cobalt ferrite CFO thin films deposited on single crystalline magnesium oxide MgO and strontium titanate STO . Epitaxial films on MgO 100 with a lattice mismatch of 0.35% showed out-of-plane anisotropy whereas the films on STO 100 with a lattice mismatch of 7.4% displayed in-plane anisotropy. Stress anisotropy calculated from angle-d...
متن کاملComposition of Pulsed-Laser-Deposited Y-Ba-Cu-O and Ba-K-Bi-O Thin Films
The composition of pulsed-laser-deposited Y-Ba-Cu-O and Ba-K-Bi-O thin films is shown to be strongly affected by target conditioning, gas pressure, and targetsubstrate distance. For both compounds, ablation from a freshly sanded target surface results in films with an excess of the more volatile elements. The concentration of these volatile elements in the films decreases until the system reach...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MRS Proceedings
سال: 1999
ISSN: 0272-9172,1946-4274
DOI: 10.1557/proc-594-69