H2S conversion in a tubular flow reactor: Experiments and kinetic modeling

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.

In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...

متن کامل

Modeling of Non-Newtonian Reactive systems in Tubular Reactor

A vast majority of material processing in industry involves homogeneous phase reactions. These reactions are carried out in batch mode as well as continuous mode. The empty tubular reactors are widely used reactor systems for continuous processing in chemical and allied industry. The heat effects due to these reactions necessitate the use of some heat removal/addition system with these reactors...

متن کامل

Chemical Kinetic Modeling of a Methane Opposed Flow Diffusion Flame and - Comparison to Experiments

The chemical structure of an opposed flow, methane diffusion flame is studied using a chemical kinetic model and the results are compared to experimental measurements. The chemical kinetic paths leading to aromatics and polycyclic aromatics hydrocarbons (PAHs) in the diffusion flame are identified. These paths all involve resonantly stabilized radicals which include propargyl, allyl, cyclopenta...

متن کامل

Kinetic Parameters and Dynamic Modeling of a Reactor for Direct Conversion of Synthesis Gas to Dimethyl Ether

In the present study, the reaction kinetics and dynamic modeling of a reactor for syngas transformation into dimethyl ether using a mixture of a metallic oxides (CuO, ZnO, and Al2O3) and an acidic component (γ-Al2O3) as the catalyst has been investigated. A combination of the Graaf kinetic model for methanol synthesis and the Bercic model for methanol dehydration was correlated with the experim...

متن کامل

Solution Polymeriza Tion of Methyl-methacrylate at High Conversion in a Recycle Tubular Reactor

The kinetics of the solution polymerization of methyl-methacrylate is characterized by a strong increase of viscosity up to 6 orders of magnitude and auto-acceleration of the reaction rate due to the gel-effect. This can lead to thermal and kinetic reactor instabilities. The kinetics were determined separately using a differential scanning calorimeter and described with a modified published mod...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Proceedings of the Combustion Institute

سال: 2019

ISSN: 1540-7489

DOI: 10.1016/j.proci.2018.05.005