Growth optimization of multicrystalline silicon
نویسندگان
چکیده
منابع مشابه
Precipitation of interstitial iron in multicrystalline silicon
The internal gettering of iron in silicon via iron precipitation at low processing temperatures is known to improve solar cell efficiencies. Studies have found that the optimal temperature lies in the range of 500 o C-600 o C. In this paper, we present experimental results on quantitatively analysing the precipitation of interstitial Fe in multicrystalline silicon wafers during the 500 o C-600 ...
متن کاملRIE-Texturing of Multicrystalline Silicon Solar Cells
We developed a maskless plasma texturing technique for multicrystalline silicon (mc-Si) cells using Reactive Ion Etching (RIE) that results in higher cell performance than that of standard untextured cells. Elimination of plasma damage has been achieved while keeping front reflectance to extremely low levels. Internal quantum efficiencies as high as those on planar cells have been obtained, boo...
متن کاملLifetime Enhancement in Efg Multicrystalline Silicon
for three different back surface recombination velocities (BSRV). The calculations reveal that the carrier lifetime limits the screen-printed (SP) EFG Si cell efficiency for lifetimes below -30 /-Is. For a 300 /-1m thick device, the carrier lifetime should be greater than 30 /-Is to realize the full benefit of a low BSRV. Therefore, lifetime enhancement is essential for achieving high efficienc...
متن کاملTexturing industrial multicrystalline silicon solar cells
Three potential techniques for texturing commercial multicrystalline silicon solar cells are compared on the basis of reflectance measurements. Wet acidic texturing, which would be the least costly to implement, produces a modest improvement in reflection before antireflection coating and encapsulation, whereas maskless reactive-ion etching texturing, and especially masked reactive-ion etched p...
متن کاملSurface Passivation Study on Gettered Multicrystalline Silicon
In this study the electronic quality of multicrystalline silicon material in the as grown state and after various POCl3 diffusion steps is analyzed. For this purpose two different surface passivations (quinhydrone-methanol and a-Si:H) are tested and also their reproducibility is checked. It is found that the chemical passivation using quinhydrone-methanol is more complicated to apply for detect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2011
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2011.01.002