Growth Behavior of Thermally Grown Oxide Layer with Bond Coat Species in Thermal Barrier Coatings
نویسندگان
چکیده
منابع مشابه
AN INVESTIGATION ON EFFECT OF BOND COAT REPLACEMENT ON HOT CORROSION PROPERTIES OF THERMAL BARRIER COATINGS
In the present study NiCrAlY bond coating layer was produced by electroplating against common atmospheric plasma spraying (APS). Both types of the bond coats were applied on IN738LC base metal then, the YSZ (ZrO2-8% Y2O3) thermal barrier top layer was coated by atmospheric plasma spray technique. Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come ...
متن کاملMathematical Analysis of Microstructural Characterizations for Thermally Grown Oxide Layers in Thermal Barrier Coatings
The thermomechanical properties of thermal barrier coatings (TBCs) such as elastic modulus, thermal conductivity, and coefficient of thermal expansions are determined by pores, cracks, and splat boundaries, which affect the thermoelastic properties of thermally grown oxide (TGO) layer and the fracture behavior in TBCs. The thermoelastic characteristics thus have been investigated through mathem...
متن کاملThermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure
The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray ...
متن کاملThe displacement of the thermally grown oxide in thermal barrier systems upon temperature cycling
Models that characterize the displacement instability of the thermally grown oxide (TGO) found in some thermal barrier systems are reviewed, consolidated and extended. It is demonstrated that the simulations are only consistent with the observations whenever the bond coat and TGO both undergo plastic deformation. The TGO yields at the peak temperature, during growth, while the bond coat yields ...
متن کاملThe application of photoluminescence piezospectroscopy for residual stresses measurement in thermally sprayed TBCs
Article history: Received 18 March 2016 Revised 16 July 2016 Accepted in revised form 28 July 2016 Available online xxxx Photoluminescence piezospectroscopy (PLPS) was used as a non-destructive technique for the measurement of residual stresses within the thermally grown oxide (TGO) layer beneath plasma-spray thermal barrier coatings (TBC). The technique has proved to be very effective for such...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Ceramic Society
سال: 2018
ISSN: 1229-7801,2234-0491
DOI: 10.4191/kcers.2018.55.4.05