Growth behavior of tantalum oxide nanotubes during constant current anodization
نویسندگان
چکیده
منابع مشابه
Synthesis of Coral-Like Tantalum Oxide Films via Anodization in Mixed Organic-Inorganic Electrolytes
We report a simple method to fabricate nano-porous tantalum oxide films via anodization with Ta foils as the anode at room temperature. A mixture of ethylene glycol, phosphoric acid, NH4F and H2O was used as the electrolyte where the nano-porous tantalum oxide could be synthesized by anodizing a tantalum foil for 1 h at 20 V in a two-electrode configuration. The as-prepared porous film exhibite...
متن کاملInvestigation on the ordering of titanium oxide nanotubes fabricated by anodization on different substrate surface morphologies
In this study, titanium oxide nanotubes anodized on threedifferent surface morphologies of titanium foils, were investigated. AFM imagesis used to show different surface roughness of these foils. Nanotubes wereanodized on titanium foils with 1) no polishing process (A sample), 2)electropolishing process (B sample) and 3) electropolishing process in ethanolicelectrolyte (C sample). To study the ...
متن کاملFormation of self-organized Zircaloy-4 oxide nanotubes in organic viscous electrolyte via anodization
This work reports the formation of self-organized Zircaloy-4 (Zr-4) oxide nanotubes in viscous organic ethylene glycol (EG) electrolyte containing a small amount of fluoride salt and deionized (DI) water via an electrochemical anodization. The structure, morphology, and composition of the Zr-4 oxide nanotubes were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), transm...
متن کاملAnodic fast-growth of highly ordered hexagonal arrays of TiO2 nanotubes by a single anodization step
Highly-ordered TiO2 nanotubes (NTs) have gained much importance for application in hydrogen production by water splitting (photoelectrochemical cells) and the dye-sensitized solar cells (DSCs) [1,2]. The TiO2 NTs can be synthesized using a titanium foil in fluoride containing electrolytes via electrochemical anodization method. The NTs geometry depends on different anodizing parameters (electro...
متن کاملProcess of growth TiO2 nanotubes by anodization in an organic media
The aim of this chapter is to show the process for the growth of TiO2 nanotube by anodizing and its features as surface. The Ti anodized nanotubes were obtained by anodizing Ti in organic medium. The process of formation of TiO2 nanotubes on Ti surfaces was established ex-situ by Scanning Electron Microscopy (SEM). At first, the growth of the TiO2 on the surface of the Ti plate occurs because o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electrochemistry Communications
سال: 2021
ISSN: 1388-2481
DOI: 10.1016/j.elecom.2021.107073