Ground tire rubber filled low-density polyethylene: The effect of particle size
نویسندگان
چکیده
In the present study, we investigated possibility of value-added recycling ultrafine ground tire rubber (uGTR) produced from water jet milling, with an average particle size a few tens microns. Our goal was to compare properties blends different uGTR and conventional fine (fGTR) contents prepared by blending low-density polyethylene (LDPE). We also aimed explore property changes caused larger specific surface area due effect. Samples were hydraulic press after internal mixing. case (GTR) filled mixtures, tensile showed rubber-like characteristics: significant decrease in modulus, elongation at break remained high, strength slightly decreased. The fracture surfaces samples analyzed scanning electron microscopy (SEM), wherein materials made better adhesion between phases. order investigate interfacial GTR LDPE, performed dynamic mechanical thermal analysis (DMTA). glass transition peak shifted higher temperature storage modulus than containing fGTR. Finally, determined Shore D hardness materials, which decreased increasing content, but greater samples. explained two phases significantly compared
منابع مشابه
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types
Linear Low Density Polyethylene-Natural Rubber (LLDPE-NR) composites in the ratio of 70:20 were made with different loadings of nanosilica and micro-scale Palm Oil Fuel Ash (POFA). Linear Low Density Polyethylene grafted with maleic anhydride (LLDPE-g-MAH) of 10 wt% was added as a compatibiliser. The composites were produced by using two-roll mill machine. The tensile properties of the composit...
متن کاملthe effect of traffic density on the accident externality from driving the case study of tehran
در این پژوهش به بررسی اثر افزایش ترافیک بر روی تعداد تصادفات پرداخته شده است. به این منظور 30 تقاطع در شهر تهران بطور تصادفی انتخاب گردید و تعداد تصادفات ماهیانه در این تقاطعات در طول سالهای 89-90 از سازمان کنترل ترافیک شهر تهران استخراج گردید و با استفاده از مدل داده های تابلویی و نرم افزار eviews مدل خطی و درجه دوم تخمین زده شد و در نهایت این نتیجه حاصل شد که تقاطعات پر ترافیک تر تعداد تصادفا...
15 صفحه اولthe effect of creative writing instruction on lexical density of advanced efl learners writing
چکیده ندارد.
15 صفحه اولGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced industrial and engineering polymer research
سال: 2022
ISSN: ['2542-5048']
DOI: https://doi.org/10.1016/j.aiepr.2021.07.001