Ground Surface Layer in α Fe-Fe<SUB>3</SUB>C Alloys
نویسندگان
چکیده
منابع مشابه
Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy. We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relation ...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملThe Effect of Mn-Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys
In this work, we have examined Fe-Mn-Si-Cr alloys possessing a good shape memory effect due to a high Mn content (28 wt pct). The addition of Cr (5 wt pct) was made in order to give fairly good corrosion resistance to the alloy. But we have verified that even in moderately corrosive environments, the presence of chromium does not bear any passivation. On the other hand, we have found that the a...
متن کاملNucleation mechanism of nano-sized NaZn13-type and α-(Fe,Si) phases in La-Fe-Si alloys during rapid solidification
The nucleation mechanism involving rapid solidification of undercooled La-Fe-Si melts has been studied experimentally and theoretically. The classical nucleation theory-based simulations show a competitive nucleation process between the α-(Fe,Si) phase (size approximately 10 to 30 nm) and the cubic NaZn13-type phase (hereinafter 1:13 phase, size approximately 200 to 400 nm) during rapid solidif...
متن کاملThe Magnetic Aspects of the γ-α and γ- Martensitic Transformations in Fe-Mn Alloys
Fe,,Mn, alloys undergo fcc-bcc (y-a) and fcc-hcp (y-E) transformations for about 0<x<10 at % and 15<x<30 at% respectively. The product phase in the region 10<x<15 at. % is mixed a+€ and ~ + y . The y-a transformation in Fe-Mn is similar to that in Fe-rich Fe-Ni alloys where the transformation takes place between a high-temperature dense fcc structure and a lowtemperature more open bcc structure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1977
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.43.3112