Grinding titanium alloys applying small quantity lubrication

Modeling and Simulation of Nanofluid Minimum Quantity Lubrication Surface Grinding Thermal Stress

The model of surface grinding with a nanoparticle jet flow of MQL was established. The surface grinding thermal stress of three workpiece materials, namely, 45 Steel, 2Cr13, and nano-ZrO2 dental ceramic, were numerically simulated. Results show that dry grinding generates larger tensile stress, whereas MQL grinding generates larger compressive stress. The finished surface of workpiece produces ...

Analysis of Minimum Quantity Lubrication (MQL) for Different Coating Tools during Turning of TC11 Titanium Alloy

The tool coating and cooling strategy are two key factors when machining difficult-to-cut materials such as titanium alloy. In this paper, diamond coating was deposited on a commercial carbide insert as an attempt to increase the machinability of TC11 alloy during the turning process. An uncoated carbide insert and a commercial Al₂O₃/TiAlN-coated tool were also tested as a comparison. Furthermo...

Titanium Alloys

Although originally discovered in the 18th century [1], the titanium industry did not experience any significant advancement until the middle of the 20th century through the development of the gas turbine engine [2]. Since then, the aerospace sector has dominated worldwide titanium use with applications in both engines and airframe structures [3]. The highly desirable combination of properties,...

Titanium and Titanium Alloys as Biomaterials

Titanium Alloys in Orthopaedics

Metallic implants are commonly used in the orthopedic field. Despite the large number of metallic medical devices in use today, they are predominantly make up of only a few metals. Metallic alloys such as titanium continue to be one of the most important components used in orthopaedic implant devices due to favorable properties of high strength, rigidity, fracture toughness and their reliable m...