منابع مشابه
Investigation into Engineering Ceramics Grinding Mechanism and the Influential Factors of the Grinding Force
The grinding force is a key parameter in the grinding process, which is closely associated with the grinding mechanism of engineering ceramics, microstructure and properties of ceramic materials, and the selection of grinding parameters. Meanwhile, it is also a key indicator to assess the grindability of a material. The grinding force is a crucial parameter to reflect the grinding process, whic...
متن کاملModeling of the Process of Coal Grinding
T. Wyleciał, H. Radomiak, D. Urbaniak, Częstochowa University of Technology, Czestochowa, Poland The use of coal in the steel industry, similarly as in the whole national ec onomy, is often preceded by its pre-treatment. Coal is mined in the form of big solids, but, being in such a form, it can’t be combusted, sintered, or gasifi ed. Therefore, it needs t o be appropriately grinding. In the pap...
متن کاملAssessment of Working Conditions of Grinding Wheels in the Grinding Process of Hard-To-Cut Materials
Abstract This study here by presents a method for comparative assessment of grinding wheels during the grinding process of hard-to-cut materials. The method in question consists of carrying out a short grinding cut in plunge grinding kinematics using grinding wheels with a customized macro-geometry upon the active surface. The work presents examples of this method’s efficacy when applied to the...
متن کاملEffect of amount of grinding on flexural strength of dental ceramics.
The aim of this study was to determine a suitable amount of grinding of a flexural test specimen for clinical evaluation of dental ceramics. Three dental ceramics (Crys-Cera, OCC and IPS Empress Cosmo) were selected. Five types of bar-shaped patterns were prepared for a three-point bending test, and four types of disk-shaped patterns for a biaxial flexural test. Ceramic specimens were fabricate...
متن کاملStudy of Traverse Grinding Process (1st Report) Accumulation Phenomenon and Size Generation Mechanism in Traverse Grinding
plicated processes on the wheel surf ace along the wheel width. In order to make these processes clear, the experimental analysis of traverse grinding was conducted by widely changing the speed ratio, Kv, the setting depth of wheel, ‡TMT, and the number of total steps, m, (the ratio of the wheel width over the traverse feed per one revolution of the workpiece). The following results were obtain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1986
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.52.120