Green Refining of Waste Lubricating Oil: A China Perspective
نویسندگان
چکیده
منابع مشابه
The Re-refining of Used Lubricating Oils
Re-refined lubricants have been produced in New Zealand for over 50 years. However, their acceptance as a high quality lubricant has been a gradual process, largely because of the scepticism of the public that the product can be re-refined to its original condition. In New Zealand Dominion Oil rerefines about 7 million litres per year, while an older acid clay method is used at Turua near Thame...
متن کاملLubricating Oil Additives
1.1 Lubrication (Rizvi, 2009) The principle of supporting a sliding load on a friction reducing film is known as lubrication (Ludema, 1996). The substance of which the film is composed is a lubricant, and to apply it is to lubricate. These are not new concepts, nor, in their essence, particularly involved ones. Farmers lubricated the axles of their ox carts with animal fat centuries ago. But mo...
متن کاملWaste lubricating oil as a source of hydrogen fuel using chemical looping steam reforming
Initial results are presented for the production of hydrogen from waste lubricating oil using a chemical looping reforming (CLR) process. The development of flexible and sustainable sources of hydrogen will be required to facilitate a ‘hydrogen economy’. The novel CLR process presented in this paper has an advantage over hydrogen production from conventional steam reforming because CLR can use ...
متن کاملA dynamic modeling for green business development in oil refining industry
A carbon-based industry, such as oil refinery, needs to change its business model to achieve a green business. Considering the existing too much data, the modeling procedure is complex. Therefore, combination of the Fuzzy Delphi method and System Dynamics can be considered to cover this complexity. The starting point in this work is literature review of prior studies on the same common topic an...
متن کاملLubricating Oil Pollution Detection Sensor Design
Metal abrasive particle content in lubricating oil is an important index to judge the degree of deterioration of lubricating oil. Established a spiral electrode capacitance sensor by the finite element software ANSYS, the simulation result shows that the sensor is sensitive to the content of metal abrasive particle in lubricating oil, not affect by the metal abrasive particle itself. According ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Trends in Renewable Energy
سال: 2019
ISSN: 2376-2136,2376-2144
DOI: 10.17737/tre.2019.5.2.0084