Graphite Furnace Atomic Absorption Spectrophotometric Determination of Trace Horseradish Peroxidase Using Nanosilver

Determination of Trace Elements in Rice Products by Flame and Graphite Furnace Atomic Absorption Spectrometry

The Thermo Scientific iCE 3000 Series Atomic Absorption Spectrometers are the ideal tool for the accurate and rapid determination of multiple trace elements in rice products. Flame atomic absorption can be used as a fast screening tool for the analysis of nutritional elements such as copper, manganese and zinc, while graphite furnace atomic absorption can be used for the accurate determination ...

GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY WITH MAlIlRIX MODIFICATION FOR DETERMINATION OF LEAD IN DRINKING WATER

An amoniumvanadate plus sodium molybdate mixed modifier Graphite Furnace Atomic Absorption Spectrometric method has been developed for determination of traces of lead in drinking water. The concentration of lead in the sample is obtained by direct comparison to linear working graph prepared from aqueous standards in the modifier medium, The results indicate the better performance of the pro...

direct determination of arsenic in potassium citrate tablet using graphite furnace atomic absorption spectrometry

in this study, a rapid and simple method based on graphite furnace atomic absorption spectrometry (gfaas) is described for direct determination of arsenic in potassium citrate tablet samples. pyrolytic graphite tubes were used as atomizers. nickel nitrate was used as chemical modifier. the ashing and atomization temperature and the concentration of modifier were also optimized. the detection li...

The Analysis of Trace Elements in Honey by Flame and Graphite Furnace Atomic Absorption Spectrometry

Direct Determination of Tin in Human Hair by Graphite Furnace Atomic Absorption Spectrometry Using Air Ashing in Graphite Tube

Direct determination of tin in human hair was performed by graphite furnace atomic absorption spectrometry. Human hair was cut into 3-5 mm long and 1-2 mg of the sample was directly introduced into a pyrolytically coated graphite tube, of which the injection hole was enlarged to a diameter of approximately 5 mm. After introduction of the sample, 20 μl of 30 mg Pd/l in 1 mol/l HCl was added as a...