Graphene NanoPlatelets reinforced tantalum carbide consolidated by spark plasma sintering
نویسندگان
چکیده
منابع مشابه
Characterization of Multiwalled Carbon Nanotube-Reinforced Hydroxyapatite Composites Consolidated by Spark Plasma Sintering
Pure HA and 1, 3, 5, and 10 vol% multiwalled carbon nanotube- (MWNT-) reinforced hydroxyapatite (HA) were consolidated using a spark plasma sintering (SPS) technique. The relative density of pure HA increased with increasing sintering temperature, but that of the MWNT/HA composite reached almost full density at 900°C, and then decreased with further increases in sintering temperature. The relat...
متن کاملFlash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide
A new ultra-rapid process of flash spark plasma sintering is developed. The idea of flash spark plasma sintering (or flash hot pressing - FHP) stems from the conducted theoretical analysis of the role of thermal runaway phenomena for material processing by flash sintering. The major purpose of the present study is to theoretically analyze the thermal runaway nature of flash sintering and to exp...
متن کاملMagnetic properties of ball-milled SrFe12O19 particles consolidated by Spark-Plasma Sintering
The room-temperature magnetic properties of ball-milled strontium hexaferrite particles consolidated by spark-plasma sintering are strongly influenced by the milling time. Scanning electron microscopy revealed the ball-milled SrFe12O19 particles to have sizes varying over several hundred nanometers. X-Ray powder-diffraction studies performed on the ball-milled particles before sintering clearly...
متن کاملChemical analysis of silica doped hydroxyapatite biomaterials consolidated by a spark plasma sintering method.
Silica (SiO(2)) and the silicate-based biomaterials play an important role due to their in vitro and in vivo biological response. The present study synthesized a novel nano-structured amorphous silica doped hydroxyapatite (HA) via an aqueous precipitation route. HA was prepared with 0, 1, 3 and 5 wt% silica, which are comparable to the measured silicon content of natural bone. After spray dryin...
متن کاملSpark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite
TaC and HfC are thought to have the highest melting point (~4000°C) among all refractory materials. The binary solid solution of TaC and HfC (Ta4HfC5) is also considered as the most refractory material with the melting point over 4000 °C and valuable physical and mechanical properties. The main goal of this work is to fabricate TaC/HfCbased composites which consolidated by means of spark plasma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2013
ISSN: 0921-5093
DOI: 10.1016/j.msea.2013.06.006