Graphene Layer Control Enabled by Nickel-Copper Alloy Thin Film Catalyst
نویسندگان
چکیده
منابع مشابه
Direct fabrication of graphene on SiO2 enabled by thin film stress engineering
We demonstrate direct production of graphene on SiO2 by CVD growth of graphene at the interface between a Ni film and the SiO2 substrate, followed by dry mechanical delamination of the Ni using adhesive tape. This result is enabled by understanding of the competition between stress evolution and microstructure development upon annealing of the Ni prior to the graphene growth step. When the Ni f...
متن کاملUltra-flexible, "invisible" thin-film transistors enabled by amorphous metal oxide/polymer channel layer blends.
Ultra-flexible and transparent metal oxide transistors are developed by doping In2 O3 films with poly(vinylphenole) (PVP). By adjusting the In2 O3 :PVP weight ratio, crystallization is frustrated, and conducting pathways for efficient charge transport are maintained. In2 O3 :5%PVP-based transistors exhibit mobilities approaching 11 cm(2) V(-1) s(-1) before, and retain up to ca. 90% performance ...
متن کاملCopper–titanium thin film interaction
Interaction between 5 lm thick copper and 50 nm thin titanium films was investigated as a function of annealing temperature and time using MeV He Rutherford backscattering, X-ray diffraction and dynamic Secondary Ion Mass Spectrometry. Samples were made by depositing 10 nm of titanium on a PECVD silicon oxynitride, followed by 50 nm of titanium nitride and 50 nm of titanium in the said order. I...
متن کاملThin film nanocomposite forward osmosis membrane prepared by graphene oxide embedded PSf substrate
One of the limiting factors in good performance of forward osmosis (FO) membranes is the internal concentration polarization (ICP). To reduce ICP, thin film nanocomposite forward osmosis (TFN-FO) membranes were fabricated by adding different amounts of graphene oxide (GO) nanoplates (0-1 wt. %) to polymer matrix of polysulfone (PSf) substrate. The prepared nanocomposite membranes exhibited both...
متن کاملElectrochemical delamination of CVD-grown graphene film: toward the recyclable use of copper catalyst.
The separation of chemical vapor deposited (CVD) graphene from the metallic catalyst it is grown on, followed by a subsequent transfer to a dielectric substrate, is currently the adopted method for device fabrication. Most transfer techniques use a chemical etching method to dissolve the metal catalysts, thus imposing high material cost in large-scale fabrication. Here, we demonstrate a highly ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2018
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927618008607