GRAPHENE-BASED MATERIAL FOR MICROSTRIP BANDPASS FILTER
نویسندگان
چکیده
منابع مشابه
Designing Microstrip Bandpass Filter at 3.2 GHz
Abstract: Bandpass filters play a significant role in wireless communication systems. Transmitted and received signals have to be filtered at a certain center frequency with a specific bandwidth. In designing of microstrip filters, the first step is to carry out an approximated calculation based on using of concentrated components like inductors and capacitors. After getting the specifications ...
متن کاملMicrostrip Cross-coupled Interdigital SIR Based Bandpass Filter
A simple and compact 4.9 GHz bandpass filter for C-band applications is proposed. This paper presents a novel microstrip cross-coupled interdigital half-wavelength stepped impedance resonator (SIR) based bandpass filter (BPF).The designed structure is similar to that of a combination of two parallel interdigital capacitors. The scattering parameters of the structure are measured using vector ne...
متن کاملMicrostrip Wideband Bandpass Filter Based on Square Ring Loaded Resonator
Abstract—In this paper, a compact microstrip wideband bandpass filter (BPF) based on square ring loaded resonator (SRLR) is proposed. The SRLR is formed by loading a pair of bent open-stubs outside the diagonal corners of a square ring, which generates three split degenerated modes. The first two split modes form a dominant wideband passband. By introducing another pair of loaded open-stubs, th...
متن کاملA Miniaturized Triple-Mode Microstrip Bandpass Filter
A Novel miniaturized triple-mode microstrip bandpass filter (BPF) using space mapping (SM) technique is presented in this paper. Three operating frequencies at 1.9 GHz, 2.14 GHz and 2.45 GHz are excited that are used for CDMA, WCDMA and RFID applications, respectively. In the proposed design, Substrate manufactured from RT_DURRIOD_5880 with dielectric constant of 2.21 and height of 20 mil that ...
متن کاملCompact Microstrip Bandpass Filter with Multispurious Suppression
A compact microstrip bandpass filter (BPF) with multispurious suppression is presented. The filter consists of two coupled half-wavelength stepped impedance resonators (SIRs) and tapped input/output (I/O) lines. With tuning the impedance ratio (K) and length ratio (α) of SIRs, a very wide stopband can be easily achieved. The filter is designed at 2.4 GHz (f0) with a wide stopband to 20GHz (8.16...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Electromagnetics Research M
سال: 2022
ISSN: ['1937-8726']
DOI: https://doi.org/10.2528/pierm22040601