Graphene-based composite membranes for nanofiltration: performances and future perspectives

Cellulose Acetate Nanofiltration Membranes for Cadmium Remediation

In this work, cellulose acetate (CA) nanofiltration (NF) membranes were prepared via non-solvent phase inversion technique (NIPS). Polymer concentration was varied from 22 to 25 wt% in order to study its effect on the membrane properties. The fabricated membranes were characterized in terms of morphological analysis using scanning electron microscopy (SEM), contact angle, water content, water p...

Ultrafast Nanofiltration through Large-Area Single-Layered Graphene Membranes.

Perforated single-layered graphene has demonstrated selectivity and flux that is orders of magnitude greater than state-of-the-art polymer membranes. However, only individual graphene sheets with sizes up to tens of micrometers have been successfully fabricated for pressurized permeation studies. Scaling-up and reinforcement of these atomic membranes with minimum cracks and pinholes remains a m...

Nanofiltration membranes

Preparation of Novel Thin-Film Composite Nanofiltration Membranes for Separation of Amoxicillin

Several novel composite membranes were prepared to separate and recycle amoxicillin from pharmaceutical wastewater via nanofiltration process. The synthesis of these membranes included three stages: 1- preparation of polysulfone ultrafiltration membranes as a support via phase separation process, 2- modification of its surface by interfacial polymerization as a selective layer (polyamide), and ...

Graphene-based biosensors: methods, analysis and future perspectives

Graphene (GN), a single layer two-dimensional structure nanomaterial, exhibits exceptional physical, electrical and chemical properties that lead to many applications from electronics to biomedicine. The unique parameters of GN, notably its considerable electron mobility, thermal conductivity, high surface area and electrical conductivity, are bringing heightened attention into biomedical appli...