Granularity reconstruction and characterization of silicon carbide micronized powders
نویسندگان
چکیده
Abstract Water glass and silica-alumina sol were used as adhesives, uniformly mixed with silicon carbide powder. The effects of binder, binder concentration, sintering temperature, process on the granularity reconstruction SiC powders studied in detail. results show that when water is binding agent, vacuum can effectively inhibit oxidation carbide, suitable granulation samples are obtained at a concentration 5%. When silica-aluminum it discovered increase engagement particle size, best effect achieved 10%. Both systems agents successfully bind micronized powder, enlarge particles, accomplish goal Granularity reconstruction.
منابع مشابه
Synthesis of nanophase silicon, carbon, and silicon carbide powders using a plasma expansion process
Nanophase powders of Si, C, and SiC with narrow size distributions are synthesized by dissociating reactants in a dc arc plasma and quenching the hot gases in a subsonic nozzle expansion. The plasma is characterized by calorimetric energy balances and the powders by on-line aerosol measurement techniques and conventional materials analysis. The measured nozzle quench rate is about 5 X 106 K/s. ...
متن کاملElectrical Characterization of Microelectromechanical Silicon Carbide Resonators
This manuscript describes the findings of a study to investigate the performance of SiC MEMS resonators with respect to resonant frequency and quality factor under a variety of testing conditions, including various ambient pressures, AC drive voltages, bias potentials and temperatures. The sample set included both single-crystal and polycrystalline 3C-SiC lateral resonators. The experimental re...
متن کاملSilicon Carbide Power Device Characterization for HEVs
The emergence of silicon carbide(SiC-) based power semiconductor switches, with their superior features compared with silicon(Si-) based switches, has resulted in substantial improvement in the performance of power electronics converter systems. These systems with SiC power devices have the qualities of being more compact, lighter, and more efficient; thus, they are ideal for high-voltage power...
متن کاملSynthesis and characterization of silicon carbide, silicon oxynitride and silicon nitride nanowires
Several methods have been employed to synthesize SiC nanowires. The methods include heating silica gel or fumed silica with activated carbon in a reducing atmosphere, the carbon particles being produced in situ in one of the methods. The simplest method to obtain b-SiC nanowires involves heating silica gel with activated carbon at 1360 uC in H2 or NH3. The same reaction, if carried out in the p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2023
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2499/1/012019