Granular Activated Carbon from Wood Originated from Tropical Virgin Forest

Separation Efficiency of Glucose and Maltose from Industrial Effluent by Granular Activated Carbon

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System

Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE)

Nitrate contamination of water resources and the growing concentration of nitrate endanger human health and the environment and considering its reduction strategies from water resources is important. The aim of this study was to investigate the possibility of removal of nitrate from aqueous solutions using granular activated carbon from grape wood coated with iron nanoparticles. The results sho...

Enhanced Removal of Trihalomethanes(THMs) from Aqueous Solutions Using Activated Carbon from Walnut Wood(WC) on Equilibrium, Thermodynamic and Kinetics

In this study, carbon was made from walnut wood as a low-cost and non-toxicnatural adsorbent.Walnut wood(WC), were successfully synthesized by an in chemical vapor deposition methodthen characterized using FT-IR techniques and used for the removal of trihalomethanes(THMs) from aqueous solution. The trihalomethanes(THMs) removal by the developed adsorbent was investigated using batch adsorption ...

Production of Activated Carbon from Cellulose Wastes

Cellulose wastes of a wood and paper factory were used to produce activated carbon. Several chemical agents under various conditions were used for production of activated carbon and hence their adsorption properties have been evaluated. In addition the effect of process parameters such as raw material, chemical agent concentration, impregnation ratio, carbonization temperature, carbonization ti...