Granite stone subjected to ultrasonic fatigue tests under three point bending modality
نویسندگان
چکیده
منابع مشابه
Corrosion Fatigue Studies on a Bulk Glassy Zr-Based Alloy under Three-Point Bending
Corrosion fatigue (CF) tests were carried out on bulk glassy Zr52.5Cu17.9Al10Ni14.6Ti5 (Vitreloy 105) samples under load-controlled three-point bending conditions with a load ratio of R = 0.1 in 0.01 M Na2SO4 + 0.01 M NaCl electrolyte. During cyclic testing, the bar-shaped specimens were polarized in situ at constant potentials and the current was monitored. Three different anodic potentials wi...
متن کاملDissipation Measurements during Ultrasonic Fatigue Tests
The aim of this paper is to analyse the dissipation observed during dynamic fatigue loading at low stress range and high number of cycles. Infrared thermographic techniques were developed to estimate the mean dissipation per cycle. Results derived from tests performed at high loading frequency on pure copper specimens showed a drift of dissipative regimes incompatible with concepts of fatigue l...
متن کاملWeathering of Stone Mountain Granite
The weathering of Stone Mountain Granite (adamellitc) forms kaolinite, endcllite, allophane and gibbsite of which kaolinite is the most stable. Bulk density ranges from 2.65 in fresh rock to a minimum of 1.48 in saprolite. It is a good index of weathering. Abrasion pH ranges from 5.0 in saprolite to 9.3 in fresh rock, and is direct]y related to bulk density and the amount of clay mineral. Among...
متن کاملExperimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests
In this study static and fatigue behaviours of honeycomb sandwich composites, made of aramide fibres and aluminium cores, are investigated through four-point bending tests. Damage and failure modes are reported and discussed. Global and local parameters were considered to evaluate the fatigue life of the analysed sandwich composites. Effects of core densities and the cell orientation (L or W) o...
متن کاملFatigue strength of bovine articular cartilage-on-bone under three-point bending: the effect of loading frequency
BACKGROUND The objective of this study was to determine the influence of loading frequency on the failure of articular cartilage-on-bone specimens under three-point bending. METHODS In this study, cyclic three-point bending was used to introduce failure into cartilage-on-bone specimens at varying loading frequencies. Sinusiodally varying maximum compressive loads in the range 40-130 N were ap...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frattura ed Integrità Strutturale
سال: 2019
ISSN: 1971-8993
DOI: 10.3221/igf-esis.48.09